c FILE NAME: Onco6711_Sk.m
c MC CODE: MCNP6.2, Los Alamos National Laboratory
c DESCRIPTION: Test case 0 - WAFAC air kerma calculation for 6711 seed;
c see [reference]
c DISCLAIMER: This file (and associated code/files) is provided in the
c hope that it will be useful but without any warranty; without even the
c implied warranty of fitness for a particular purpose. See full 
c disclaimer at [link]
c COPYRIGHT (C) 2023 Hali Morrison (hali.morrison@ahs.ca)
c REDISTRIBUTION: redistribution of this and all associated files is NOT
c permitted.
c SOURCE OF THIS FILE: [link]
c
OncoSeed 6711 I-125 vacuum simulation (full)
1     2  -6.2	   (2 -7 18 -19)		$ I-125 coating cylinder
2     2  -6.2	   (-1 10 -5)			$ I-125 coating left end
3     2  -6.2	   (-1 -11 6)	  		$ I-125 coating right end
4     2  -6.2	   (-8 3 -18 10 1 -7)		$ I-125 coating left bevel	
5     2  -6.2	   (-9 4 19 -11 1 -7)		$ I-125 coating right bevel
6     3  -10.5     (-2 18 -19):(-3 5 -18):(-4 19 -6) $ Inner silver marker
7     6  -0.001784 -12 14 -15 #1 #2 #3 #4 #5 #6	$ Argon fill gas
8     5  -4.54	   (-13 12 14 -15)		$ Titanium cylinder
9     5  -4.54     (-16 -14)	 		$ Titanium left end cap
10    5  -4.54	   (-17 15)			$ Titanium right end cap
20    0		   (-13 -14 16 -996) #300	$ left periphery
21    0		   (-13 15 17 -996) #300	$ right periphery
22    0		   (13 -996) #300 		$ wall periphery	
c
300   0		(21 -20 22 -23 24 -25)		$ Sk Voxel		
c
999   0        996

1   cx    0.0175                $  Ag marker inner cyl radius
2   cx    0.0250                $  Ag marker outer cyl radius
3   kx   -0.1575 1 1		$  left side cone/bevel
4   kx    0.1575 1 -1		$  right side cone/bevel
5   px   -0.1400		$  Ag marker left end
6   px    0.1400		$  Ag marker right end
7   cx    0.025175		$  I-125 coating outer cyl radius
8   kx   -0.157675 1 1		$  I-125 coating left cone/bevel
9   kx    0.157675 1 -1		$  I-125 coating right cone/bevel
10  px   -0.140175		$  I-125 coating left plane
11  px    0.140175		$  I-125 coating right plane
12  cx    0.0330		$  Ti inner cyl radius
13  cx    0.0400  		$  Ti outer cyl radius
14  px   -0.1900		$  left plane end-weld edge
15  px    0.1900		$  right plane end-weld edge
16  sx	 -0.1874167 0.0400833	$  left end-weld hemisphere
17  sx    0.1874167 0.0400833	$  right end-weld hemisphere
18  px   -0.1325		$  left bevel start
19  px    0.1325		$  right bevel start
c
20  pz	  10.025		$  Sk outer z plane boundary
21  pz    9.975			$  Sk inner z plane boundary
22  px    -1.35			$  Sk left x plane boundary
23  px    1.35			$  Sk right x plane boundary
24  py    -1.35			$  Sk lower y plane boundary
25  py    1.35			$  Sk upper y plane boundary
c
996  so  20.0			$ universe boundary

MODE p
imp:p  1 13r 0
SDEF par=2
     erg=d1
     cel=d2
     pos=fcel d3
     rad=fcel d4
     ext=fcel d5
     axs=1 0 0
     eff=0.005
c
SI1  L 0.0354925 0.031704 0.030995 0.030944 0.027472 0.027202 $ NNDC I-125
SP1  D 0.0668    0.0375   0.130    0.0674   0.731    0.396    $ no 3.77 keV
c Current NNDC spectrum
c
SI2  L   1	2	3 	4	5             $ cells
SP2  V   $ 					      $ volumes cm^3
C
DS3  L  0       0 0                   $ position distribution
       -0.1400875 0 0
        0.1400875 0 0
       -0.1363375 0 0
	0.1363375 0 0
c
DS4  S 11 12 13 14 15                       $ radial distribution
SI11   0.0250 0.025175
SP11 -21 1
SI12   0     0.0175
SP12 -21 1
SI13   0     0.0175
SP13 -21 1
SI14   0.0175   0.0250
SP14 -21 1
SI15   0.0175   0.0250
SP15 -21 1
c
DS5  S 21 22 23 24 25                      $ length distribution
SI21 -0.1325    0.1325
SP21 -21 0
SI22 -0.0000875 0.0000875
SP22 -21 0
SI23 -0.0000875 0.0000875
SP23 -21 0
SI24 -0.0038375 0.0038375
SP24 -21 0
SI25 -0.0038375 0.0038375
SP25 -21 0
c
c
*F24:p 300
E24   0.005   0.0355                $ below & above 5 keV
DE24  0.001   0.0015  0.002   0.003   0.0032029 0.003203 0.004 0.005
      0.006   0.008   0.010   0.015   0.02    0.03    0.04    0.05
      0.06    0.08    0.1     0.15    0.2     0.3     0.4     0.5
      0.6     0.8     1.0     1.25    1.5     2.0
DF24  3599    1188    526.2   161.4   133     146     76.36   39.31
      22.7    9.446   4.742   1.334   0.5389  0.1537  0.06833 0.04098
      0.03041 0.02407 0.02325 0.02496 0.02672 0.02872 0.02949 0.02966
      0.02953 0.02882 0.02789 0.02666 0.02547 0.02345
c
c
c materials and cross sections ----------------------------------------------
M2   47000 3.5  35000 2.5 53000 1 $ AgBr/AgI 2.5:1 mixture, p=6.2
M3   47000            1                $ Ag radio-opaque marker, p=10.5  
M4   6000 -0.000124 7000 -0.755267 8000 -0.231781 18000 -0.012827 $Dry Air                
M5   22000  1                           $ Ti capsule, p=4.54
M6   18000  1				$ Ar fill gas,            p=0.001784
c
prdmp j 2e8 0 2
RAND  gen=2
NPS   5e9

